FO panels

PreCONNECT® SMAP-G2 - Highly modular 19” panel systems

The perfect solution for your data center cabling

Whatever your requirements are, our 19" PreCONNECT® panel systems can be individually adapted in just a few steps and, depending on the panel variant, focus on maximum space savings through maximum port density or a high degree of serviceability. The plastic-reduced 19" panel systems for data centre cabling are suitable for all IT applications such as Ethernet and Fibre Channel and especially for Spine-Leaf structures. They allow an easy and cost-effective migration to other applications, e.g. from duplex technology to MTP® based parallel optics.

1

High granularity

Various height and width graduations of the front plates and segmentation of the panel back planes for application-specific cable entries.

2

Easy configuration

Several coupler and fiber types as well as fiber optic and copper data cabling can be flexibly mixed within one housing.

3

Optimal use of space

A choice of 48, 72 or 96 ports per HU is available for maximum use of the front panel - depending on whether LC duplex or MTP® ports are used.


Service-friendly assembly

  • Fast and easy handling during installation, one-man installation possible 
  • Toolless assembly of the part front plates or the MTP® module cassettes can be carried out using quick-release fasteners
  • The modul cassettes can be pushed into the panel from the front and can be pulled out to the front for maintenance
  • The proven PreCONNECT® square interface allows the trunk cables to be attached without tools

PreCONNECT® SMAP-G2 panel systems - the right solution for every application

go to webinar


PreCONNECT® SMAP-G2 panel systems in comparison

Which is the right panel for your data center cabling?

PreCONNECT® SMAP G2 Standard Density

PreCONNECT® SMAP-G2 Standard Density

Standard port density & clear arrangement

Port density per height unit (HU)

  • 48 LC-Duplex or MTP® | MPO Ports
  • 2100 (per m² data center area*)

User friendliness

  • high
PreCONNECT® SMAP G2 High Density

PreCONNECT® SMAP-G2 High Density

High port density & space-saving

Port density per height unit (HU)

  • 72 LC-Duplex or MTP® | MPO Ports
  • 3150 (per m² data center area*)

User friendliness

  • medium
PreCONNECT® SMAP G2 Ultra High Density

PreCONNECT® SMAP-G2 Ultra High Density

Very high port density & very space-saving

Port density per height unit (HU)

  • 96 LC-Duplex or 48 MTP® ports
  • 4200 (per m² data center area*)

User friendliness 

  • low

Panel characteristics

  • Panel hight: 1, 2, 3, 5 HU
  • Panel depth: 200, 300 mm

Width partitions

  • 2/2: PreCONNECT® DUODECIM and OCTO
  • 4/4: PreCONNECT® DUODECIM and OCTO   

Possible combinations

  • Fiber optic and RJ45 can be combined within the panel

Fields of application

  • all IT applications, such as Ethernet
    and Fibre Channel
  • especially suitable for Leaf-structures
  • PreCONNECT® DUODECIM,
    PreCONNECT® OCTO
  • Cable management: optional

to product page

*(Rack 80 x 120cm, 42HU)

Panel characteristics

  • Panel hight: 1, 2 HU
  • Panel depth: 200, 300 mm

Width partitions

  • 4/4: PreCONNECT® DUODECIM
  • 6/6: PreCONNECT® OCTO
  • 3/3: PreCONNECT® SEDECIM

Possible combinations

  • Fiber optic and RJ45 can be combined within the panel

Fields of application

  • all IT applications, such as Ethernet
    and Fibre Channel
  • especially suitable for Spine-Structures
  • PreCONNECT® DUODECIM, PreCONNECT® OCTO, PreCONNECT® SEDECIM
  • Cable management: optional

to the product page

Panel characteristics

  • Panel hight: 1 HU
  • Panel depth: 200, 300 mm

Width partitions

  • 4/4: PreCONNECT® DUODECIM and OCTO
  • 6/6: PreCONNECT® OCTO and SEDECIM
      

Possible combinations

  • Fiber optic and RJ45 can be combined within the panel

Fields of application

  • all IT applications, such as Ethernet
    and Fibre Channel
  • especially suitable for Spine-Structures
  • PreCONNECT® DUODECIM, PreCONNECT® OCTO, PreCONNECT® SEDECIM
  • Cable management: optional

to the product page


Wach the webinar

The right solution for every application

Which is the right PreCONNECT® SMAP-G2 panel for your data center cabling?

go to webinar


Very high service friendliness is an important criterion for you?

The PreCONNECT® Data Center Panel is equipped with a drawer technology, where the modules can be toolless pulled out to two positions and can also be completely removed for maintenance.

to product page


You would like to modernise the cabling of your data center?

PreCONNECT® panel systems are also part of and can be used with the following Rosenberger OSI cabling solutions for parallel optics cabling or duplex applications, which enable a cost-effective migration to MPO based parallel optical applications.

Do you have any questions about our systems? We will be happy to help you. Contact us