PreCONNECT® flexNET โ flexible networking
Traditionally structured cabling with enhanced flexibility
Would you like greater flexibility in the physical layout of your workplaces? Then PreCONNECT® flexNET is the ideal solution for you! This network solution is an extension of PreCONNECT® isoNET.
The additional flexibility is achieved by interconnecting a passive copper consolidation point in the third-level sector. The great benefit: Completely new end-user connections become easily available at the passive consolidation point and existing workplaces can be moved. The extension and restructuring work can be performed without disrupting ongoing operations. As a result, PreCONNECT® flexNET is the perfect response to the demands of the increasingly dynamic work processes in the office environment, in manufacturing and in building management.
The planning, installation and commissioning of the innovative, standards-compliant and passive building cabling system are undertaken by Rosenberger OSI itself or by its qualified local partners. Only high-quality components are used.
PreCONNECT® flexNET LAN cabling system consists of:
- Range of planning and installation services
- State-of-the-art distribution components
- Fibre optic cables pre-assembled on one or two sides with up to 48 fibres
- High-quality copper cabling
- Various 19โ panel systems for splice or patch applications
- Wall and free-standing distributors as splice and distribution variants
- Wall and underfloor distributors acting as passive consolidation points
- Connecting sockets and patchcords
- Useful accessories

Features
- End-to-end, fully harmonised and exceptionally flexible cabling system for cabling buildings and offices
- Forward-looking fibre optic technology
- High-quality copper cabling
- Time- and cost-efficient LAN cabling thanks to the use of cables pre-assembled on one or two sides depending on local requirements to offer approx. 15% time saving at the installation site.
- Standards compliant planning and implementation
- Thanks to the gel-free cables, it is not necessary to clean the fibres when splicing on-site and work is therefore more efficient
- The cables are available in various fire classes (CPR)
- Indoor cables for permanent installation are available ex stock in the highest available fire protection class (B2)
Fields of application of the continuous LAN cabling system:
Classic structured cabling solution with more flexibility for buildings and office environments
- for the increasing requirements in terms of flexibility in workplace design
Further information about the different applications can be found in the product information.
Do you have any questions about our systems? We will be happy to help you.
Benefits
- Greater flexibility in the physical layout of workplaces.
- Seamless extension and restructuring during ongoing business operations, enabled by the use of passive consolidation points in the third-level close to the endpoints.
- Time-saving, cost-effective LAN cabling with single and double-sided pre-assembly and cabling design created by experts.
- A secure investment, as the passive components can be relocated and reused in the event of a move.
Properties of individual system components
PreCONNECT® flexNET is a conventional cabling solution with state-of-the-art distribution components and, in some cases, pre-assembled fibre optic and copper cabling.
PreCONNECT® flexNET at a glance:
- Passive copper consolidation points in the third-level sector close to the endpoints, optimum conditions for the redesign of local space layouts, retrofitting is performed as far as possible without interruption or disruption to business operations due to the diversified local distributor structure
- Glass-fibre cable products pre-assembled single-sided and double-sided, time savings of up to 15% at the installation site
- Gel-free optical fibre cables, simpler splicing
- Reduced-diameter optical fibre cables, forward-looking thanks to reduced cable duct occupancy to permit future expansion
- MTP®|MPO connecting cables (as an alternative to LC), reduced cable-laying work, highly compact solutions
- CU cables and CU patchcords, fully harmonised components
- Cables available in class B2 (CPR), currently the highest available fire protection class
- Service provision from experts: Planning, production, installation and commissioning of the network solution from a single supplier. Reduced coordination effort, consistent project planning
Rack: Central Distributor IP 20:
- Disassemblable steel section rack frame
- Two lateral door inserts with locking mechanism
- Front and back perforated sheet door with three-point locking (free perforated sheet cross-section 80%)
- Possibility of installing a profile half cylinder lock
- 19โ level 42 HU, front and back
- Top with cable passage capability and/or installation of fan module
- Base plinth provided separately
- Cover plates in floor area, removable for cable insertion
- For W=800 mm: Metal cable clips 66 mm x 125 mm at front 19โ level (set=10 items)
- Earthing set (mounted)
- Set of M5 screws (50 items)
Technical information:
Surface: Cladding parts/plinth painted RAL 7035 light grey
Design sections: painted RAL 3002 crimson red, other colours on request
Delivery form: fully assembled, plinth provided separately
Floor distributor: 19โ free-standing distributor
- Developed for flexible use in the office environment
- Optimum, rapid access thanks to the removable cladding parts
- Stable, welded frame construction
- Panel combination: D=700 mm, W=600 mm
- Pre-perforated areas for the insertion of cables in the top and base sections
- Possibility of housing a fan module in the top and base sections
- Two-way door hinges
- Doors with swivel handle, possibility of incorporating DIN profile half cylinder locks
- Cover and side panels with turnbuckle-type fast-locking mechanisms
- Many different possible configurations
- Large range of accessory parts
Technical information
Material: sheet metal, cover made from Aluminium
Surface: powder coated RAL 7035 light grey, side walls in RAL 7037 dust grey
Delivery form: assembled
Floor Distributor: Wall Distributor
- Protection type IP 54
- Visually attractive panel
- Space-saving construction
- Stable basic construction
- 2 doors with swivel handle lock and three-point locking
- Integrated viewing window on one side
- Removable front cover
- Doors with 1800-hinges for optimum accessibility
- Profile half cylinder lock: Two-way key bit 5 mm
- Integrated cable flange plates
- Installation dimensions as per IEC 60297-3-100
- Integrated outlet filter (IP 54) for fan installation
LAN wall distribution panel, 4 HU
- Dimensions: H=230 mm, W=506 mm, D=536 mm with 19โ level, 4 HU, aligned vertically with the supporting wall
- RAL 7035 light grey
LAN wall distribution panel, 6 HU
- Dimensions: H=360 mm, W=557 mm, D=636 mm with 19โ level, 6 HU, aligned vertically with the supporting wall
- RAL 7035 light grey
Floor Distributor: Wall enclosure 9-19 HU
- Developed for flexible use in the office environment
- Optimum, rapid access thanks to the removable cladding parts
- Stable, welded frame construction
- Panel combination: D=400 mm, W=600 mm
- Pre-perforated areas for the insertion of cables in the top and base sections
- Possibility of housing a fan module in the top and base sections
- Two-way door hinges
- Doors with swivel handle, possibility of incorporating DIN profile half cylinder locks
- Cover and side panels with turnbuckle-type fast-locking mechanisms
- Many different possible configurations
- Large range of accessory parts
Technical Information:
Material: sheet steel, cover made from Aluminum
Surface: powder coated RAL 7035 light grey, side panels in RAL 7037 dust grey
Delivery form: assembled