FO-Patch Cords and Equipment Cords - Standard
Fiber-optic patchcords are single-, dual-, or multi-fiber data cables that are factory-assembled with the commonly used fiber-optic connectors – LC, SC, E-2000®, MTP®, SN®, CS®, MDC, etc. – and are used to connect IT hardware (e.g. switches, servers) equipped with fiber-optic interfaces either directly “point-to-point” or, alternatively, to fiber-optic infrastructure cabling. The terms used in the EN 50173 standard are equipment cord, patchcord and jumper.
You can also now order online in our Rosenberger OSI Online Shop - the Webshop of the fiber optics expert. In the Webshop, you will find our fiber-optic patchcords with singlemode and multimode OM3 and OM4 fibers in FRNC-LSZH indoor cables for stationary, weather-protected use in accordance with IEC 60721-3-3 (e.g. data centers, buildings). Fast delivery. No minimum order amount Carriage-free as of an order value of €100. 5-year guarantee
Features
- Kink and crush resistance optimized for environmental conditions
- Suitable for operation in temperatures from -10 °C to +60 °C, patchcords for other temperature ranges on request
- Coding: Full-duplex cables with duplex connectors on both sides "crossed" in accordance with ISO/IEC 11801 and EN 50173
- Half-duplex cables with duplex/simplex connectors "uncrossed"
- Duplex cables with simplex connectors on both sides "uncrossed"
Fiber-optic patchcords - Other technical characteristics:
Fiber categories:
Singlemode OS2 9/125µ and multimode OM3 or OM4 50/125µ.
Connectors:
Available with all commonly used connectors, such as LC, SC, E-2000®, MTP®, SN®, CS®, MDC.
Form of delivery:
Insertion loss (IL) measured according to IEC 61300-3-4 method “C” or “Substitution”, MM 850nm/SM 1310nm, measurement values available on request or can be downloaded from our homepage on specification of the patchcord serial numbers
The serial number label indicating the length can be found at both ends of the patchcord
Individually packaged in foil bag with product ID label
Length tolerances:
Up to 1 m = - 50 mm
2 m to 3 m = - 100 mm
4 m to 25 m = - 200 mm
Longer than 25 m = - 1 %
Applications
- Fiber-optic patchcords suitable for connecting IT hardware (e.g. switches, servers) equipped with fiber-optic interfaces either directly “point-to-point” or, alternatively, to fiber-optic infrastructure cabling.
