Rosenberger-OSI GmbH & Co. OHG
en
PreCONNECT® COPPER HIGH DENSITY
 

PreCONNECT® COPPER High Density – for higher port density

 

The PreCONNECT® COPPER High Density trunk the consistent further development of our successful PreCONNECT® COPPER ToR-G2 trunks, to fulfil the demand on even higher port density.

 

System consists of:

  • Factory assembled 24-pair/6 channel Cu cable, Cat.7 S/FTP AWG23/1 or AWG26/1, FRNC-LSZH indoor cable
  • With shielded Cat. 6a RJ45 jack modules within 19“ Panels, to accomodate the at the trunk legs factory assembled module cubes
  • Suitable 19” panels
  • Suitable RJ45 patchcords
  • Useful accessories
PreCONNECT® COPPER HIGH DENSITY Cabling System
 

Features

  • 10GBASE-T class EA permanent links with AWG23/1 cable up to 90 meters
  • 10GBASE-T class EA permanent links with AWG26/1 cable up to 60 meters
  • Diverse 19“ panel selectable
PreCONNECT® COPPER HIGH DENSITY trunk
 

Fields of applications:

  • IT room cabling within data centers
  • Data center and EDGE computing containers

Further information about the different applications can be found in the product information.

Do you have any questions about our systems? We will be happy to help you.

Contact us
 

 

Benefits

  • Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for top-of-the-rack (ToR) cabling
  • Fast and safe installation trough factory assembled plug & play systematic
  • Highest quality and cost-efficiency through factory assembling
  • PreCONNECT® cabling systems consist of perfectly harmonized modular single components
 

Properties of individual system components

The PreCONNECT® COPPER High Density trunk the consistent further development of our successful PreCONNECT® COPPER ToR-G2 trunks, to fulfil the demand on even higher port density.

Particular suitability for „top-of-the-rack“ through the use of innovative thin, flexible Cat.7 copper data cables with 24 foil-screened AWG23/1 solid wire pairs below an overall copper braid, with a FRNC-LSZH cable jacket. Selectively AWG23/1 or AWG26/1.

The thin and flexible cables are offering their advantages at raised-floor installations too, their much lower volume interferes the flow of the cooling-air less and they do not fill the cable-trays and the raised-floor that much. By laying the cables within equipment racks, the cables can be routed in a manner to not interfere the flow of the cooling-air at the equipment cooling-fan´s inlet and outlet sides, because of its higher flexibility and its thin diameter. So the cable itself helps your equipment cooling optimization.


Cable:

  • 6-channel S/FTP Cat.7, solid wire foil-screened pairs, below overall copper braid, FRNC-LSZH cable jacket, color aqua
  • Selectively six 4x2xAWG23/1 or six 4x2xAWG26/1
  • CPR class: AWG23/1 selectively B2ca and Dca, AWG26/1 = Dca
  • Diameter: AWG23/1 B2ca = 18.2mm, AWG23/1 Dca = 18mm, AWG26/1 = 13.9mm

RJ45 Jack module:

Both sides factory assembled with each six module-cubes to be installed into the shielded Cat.6A ISO/IEC RJ45 Keystone jack modules within the Panels, fanout legs protected with overall copper braid. 

Link lengths:

The PreCONNECT® COPPER High Density trunks are fulfilling the specifications of permanent-link 10GBE Klasse EA:
- AWG23/1 up to 90m
- AWG26/1 up to 60m instead of the standardized 90m

The legs with the module cubes are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.

The length of the legs with the module cubes are matched to the corresponding 19“ panel.

We deliver PreCONNECT® COPPER High Density trunks in our well known factory assembled high PreCONNECT® quality and „plug-and-play“ functionality and 100% factory measured of course. You merely must lay the cable, detach the pulling-eyes and snap in the module cubes into the RJ45 keystone jack modules within the 19” panels.

Delivery form: As cable ring in cardboard-box with measurement protocol

PreCONNECT® COPPER High Density 19“ panels:

1HU 24 RJ45 Cat. 6A to accommodate 24 trunk legs assembled with module cubes:

  • Material: Steel, powder-coated
  • Depth: 120mm

1HU 48 RJ45 Cat. 6A to accommodate 48 trunk legs assembled with module cubes:

  • Material: Steel, powder-coated
  • Depth: 120mm

Possible combinations: Fiber optic and RJ45 can be combined within the SMAP-G2 panels

RJ45 Cat. 6A patchcords: 

  • Cat. 6A ISO/IEC
  • Polarity 1:1   TIA 568 B
  • Applicable for PoE+
  • Shielded RJ45 connectors with 2 component boot with latch protection and protective cap on both sides.
  • Cable type: Cat.7, S/FTP, flex, 4 foil-screened AWG27/7 pairs,
  • Up to 900 MHz, FRNC-LSZH, diameter 5.7mm, color grey
  • Other lengths, colors and types on request

Product Overview and Resources