PreCONNECT® Copper ToR G2 copper cabling system

PreCONNECT® COPPER ToR G2

PreCONNECT® COPPER ToR – Generation 2 is the re-design of our  factory assembled copper data cable Trunks optimized for "top-of-the-rack" Plug & Play installations in data centers.


System consists of:

  • Factory assembled 24-pair/6 channel Cu cable, Cat.7 S/FTP AWG24, FRNC-LSZH indoor cable
  • With shielded Cat. 6a RJ45 Jack modules
  • Suitable Patchcords
  • Useful accessories
  • Patch Location Rack

Features

  • Class EA permanent links only up to 60 meters
  • 19“ Panel systems in three different types selectable

Fields of applications:

  • IT room cabling within data centers
  • Data center and EDGE computing containers

Further information about the different applications can be found in the product information.

Do you have any questions about our systems? We will be happy to help you.

Contact us
 


Benefits

  • Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
  • Fast and safe installation trough factory assembled Plug & Play systematic
  • Highest quality and cost-efficiency through factory assembling
  • PreCONNECT® cabling systems consist of perfectly harmonized modular single components

Properties of individual system components

PreCONNECT® COPPER ToR – Generation 2 is the re-design of our factory assembled copper data cable trunks optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.

PreCONNECT® COPPER ToR G2 Trunks are the consistent further development of our successful PreCONNECT® COPPER Standard Trunks, fulfilling the requirement to have thin and flexible cables for „top-of-the-rack“ cabling. 

Particular suitability for „top-of-the-rack“ through the use of innovative thin, flexible Cat.7 copper data cables with 24 foil-screened AWG24/1 solid wire pairs below an overall copper braid, with a FRNC-LSZH cable jacket.

The thin and flexible cables are offering their advantages at raised-floor installations too, their much lower volume interferes the flow of the cooling-air less and they do not fill the cable-trays and the raised-floor that much. By laying the cables within equipment racks, the cables can be routed in a manner to not interfere the flow of the cooling-air at the equipment coolingfan´s inlet and outlet sides, because of its higher flexibility (smallest allowed installed bending radius = 66 mm) and its thin diameter. So the cable itself helps your equipment cooling optimization. Last but not least the fire load of the cable of our PreCONNECT® COPPER ToR G2 Trunks is much lower than of our PreCONNECT® COPPER Standard Trunks.


Cable:

  • 6-channel S/FTP Cat.7 
  • Six 4x2xAWG24/1 solid wire foil-screened pairs, below overall copper braid 
  • FRNC-LSZH cable jacket
  • color aqua, diameter = 16.4 mm 
  • Other wire diameters on request 
  • GHMT TA certificate no.:z4785a-xx-E
  • Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
     

PreCONNECT® COPPER ToR – Generation 2

The shielded RJ45 Keystone jack module is Cat.6A ISO/IEC compliant. 
The PreCONNECT® COPPER ToR G2 Trunks are fulfilling the specifications of permanent-link 10GBE class EA, but only up to 60m instead of the standardized 90m. Deliverable with other wire diameters for longer link lengths on request. 

The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk. 

The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® COPPER ToR G2 19” Panel as shown below. 

We deliver PreCONNECT® COPPER ToR G2 in our well known factory assembled high PreCONNECT® quality and „plug-and-play“ functionality and 100% factory measured of course. You merely must lay the cable, detach the pulling-eyes and snap in the RJ45 Keystone jack modules into the 19” Panels. 

Delivery form: As cable ring in cardboard-box with measurement protocol

 

PreCONNECT® COPPER 19“ Panels:

0.5 HU fits for 24 Keystone Jacks:

  • Two pcs. of this Panel above e.o. add up to 48 RJ45 Ports per HU
  • Material: stainless steel
  • Depth: 100mm

1 HU fits for 24 Keystone Jacks:

  • Material: Steel, powder-coated
  • Depth: 150mm
  • Colour: RAL 7035 light gray or RAL 9005 black

1 HU fits for 24 Keystone Jacks, 30° cable routing:

  • Material: Steel, powder-coated 
  • Depth: 120mm
  • Colour: RAL 7035 light gray or RAL 9005 black

 

RJ45 Cat. 6A Patchcords: 

  • Cat. 6A ISO/IEC, 1:1 coding
  • Shielded RJ45 connectors with 2 component boot with latch protection
  • and protective cap on both sides.
  • Cable type: Cat.7, S/FTP, flex, 4 foil-screened AWG27/7 pairs,
  • up to 900 MHz, FRNC-LSZH
  • Color: gray
  • Other lengths, colors and types on request
  • GHMT PVP certificate no.: z4826a-xx-E
     

Product Overview and Resources