FO-Patch cord and equipment cords
 

Fibre optic patch cords and equipment cords - standard

 

Fibre optic patchcords are single-, dual-, or multifibre data cables that are factory-assembled with the commonly used fibre optic connectors – LC, SC, E-2000®, MTP®, SN®, CS®, MDC, etc. – and are used to connect IT hardware (e.g. switches, servers) equipped with fibre optic interfaces either directly “point-to-point” or, alternatively, to fibre optic infrastructure cabling. The terms used in the EN 50173 standard are equipment cord, patchcord and jumper. 

You can also now order online in our Rosenberger OSI online shop - the webshop of the fibre optics expert. In the webshop, you will find our fibre optic patchcords with singlemode and multimode OM3 and OM4 fibres in FRNC-LSZH indoor cables for stationary, weather-protected use in accordance with IEC 60721-3-3 (e.g. data centres, buildings). Fast delivery. No minimum order amount. Carriage-free as of an order value of €100. 5-year guarantee

go to the online shop


 

Features

  • Kink and crush resistance optimised for environmental conditions
  • Suitable for operation in temperatures from -10 °C to +60 °C, patchcords for other temperature ranges on request
  • Coding: Full-duplex cables with duplex connectors on both sides "crossed" in accordance with ISO/IEC 11801 and EN 50173
  • Half-duplex cables with duplex/simplex connectors "uncrossed"
  • Duplex cables with simplex connectors on both sides "uncrossed"

 

Fibre optic patchcords - other technical characteristics:

Fibre categories:
Singlemode and multimode

Connectors:
Available with all commonly used connectors, such as LC, SC, E-2000®, MTP®, SN®, CS®, MDC.

Form of delivery:
Insertion loss (IL) measured according to IEC 61300-3-4 method “C” or “Substitution”, MM 850nm/SM 1310nm, measurement values available on request or can be downloaded from our homepage on specification of the patchcord serial numbers 
The serial number label indicating the length can be found at both ends of the patchcord 
Individually packaged in foil bag with product ID label

Length tolerances:
Up to 1 m = - 50 mm
2 m to 3 m = - 100 mm
4 m to 25 m = - 200 mm
Longer than 25 m = - 1 %

  

Request a non-binding offer


 

Applications

  • Fibre optic patchcords suitable for connecting IT hardware (e.g. switches, servers) equipped with fibre optic interfaces either directly “point-to-point” or, alternatively, to fibre optic infrastructure cabling.

Product Overview and Resources